1 / 1
12 cm terrain tile for 6mm Wargaming - S Curve Pipeline — zdjęcie 1

12 cm terrain tile for 6mm Wargaming - S Curve Pipeline

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a terrain tile 12CM on a side optimized for 6mm wargaming

Ocena
0 / 5
Polubienia
8
Pobrania
34
Wydruki
0
Wyświetlenia
355
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a terrain tile that features a plain pipeline snaking across it for 6mm wargames that will allow you to combine multiple tiles to make a gameboard. This is intended to be combined with other pipeline tiles to make longer pipeline. Note: pipeline tiles aren't designed to be totally interchangeable as the pipeline enters and exits the tile offset from center. This tile will act as an adapter to let you adjust entry and exit points for other tiles. Right hand and left hand versions both provided.

Dovetail connectors are provided to help align, but I recommend also using something sticky on the dovetail to help keep it in place, the tiles are kind of thin.

Optimized for printing on FDM printers without supports. It's a big lump of a square, so no need for rafts, etc. I test using a Prusa Mini+ using .2mm layer heights.

Tagi