Nuki Knob Adapter for ISEO R6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nuki Smart Lock 4.0 knob adapter for an ISEO R6 cylinder. Might work with more Nuki and cylinder models.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
What?
Use this to adapt your Nuki Smart Lock 4.0 to an ISEO R6 knob cylinder. Press an M4 threaded insert in the hole.
This may fit other Nuki smarlock models.
This may fit other cylinder models, as Nuki sells the same adapter for “ABUS,CISA, BRICARD, AXA, ISEO” cylinders.
Why?
Nuki are selling those for 0€ and 3.90€ shipping (where I live) on their website. I ordered one which was supposed to be shipped within 5 days and still was not after 7 days. I was impatient so I gave it a try.
How?
Printing
I printed this with black PLA+, no supports, 50% grid infill.
Screwing
Once printed I pressed an m4 threaded insert in the screw hole. I used a grinder to cut a longer one to a 3.3mm length, for the aesthetics, but I think that it would work with a longer one too (as long as it doesn't protrude inside the shaft).
Using without the screw might be possible, but you may then need a material more rigid than PLA, and higher infill.
What next?
Feel free to remix. I have included the F3D file.