1 / 3
Power Supply Case Meanwell LRS-35-12
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for the Meeanwell LRS35-12.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Hardware:
7x M3x6mm
4x Heat inserts M3x3mm
1x Rubber grommet 11mm
I printed it standing on its face, using clear PETG. I was trying out my 0.6mm nozzle and used the largest layer height preset, which was 0.42mm.
Printing it in that orientation is not ideal, but saves on using support.
With the above mentioned setup it still feels quite sturdy. Once the power supply is mounted, having the layers perpendicular to the long bottom is much less of a problem, since the psu supports it quite well.