713 modeli
This mount allows you to quickly and securely attach your camera to the shoulder strap of your backpack. Using this mount you can access your camera at any time during activities such as hiking and never miss a moment. These types of…
A PSU Fan cover/silencer for the Creality Ender 3 Pro / Meanwell LRS-350-24 PSU This model was designed to print the models separately in different colors and fit the embossed letters into the debossed fan cover. If the embossed “GHOST”…
LRS-200 : M4x5-8mm BHCS, SHCS x4 *8mm bolts may too long, be careful. RS-25 : M3x5-8mm BHCS, SHCS x 2 *8mm bolts may too long, be careful. raspberrypi : M2.5x5mm or longer BHCS/SHCS x4, designed for considering self fixation without using…
I designed this PSU cover for the Mean Well LRS200-24 PSU. The model files contain one “normal” cover and one with the VORON Design logo (i originally designed this cover for my VORON v2.4). EDIT: Dualcolor version available
This is a simple cover for the Meanwell LRS-350 series of power supplies. It has a mounting hole for an IEC-14 power socket (commonly available from Amazon) and covers the voltage terminals of the power supplies. Print instructions This…
This print is helpful when mounting a Mean Well LRS-100-5 5v power supply to a DIN rail. This power supply is handy for a variety of applications including 3D Printers like Voron, RatRig, HevORT, and others. Secure the power supply to the…
UPDATE!!!! Oct. 2020 I change the case a little bit and the upper and lower mount. If you print the old case and your mounts doesnt fit, you only print the mounts new. then it works. Sorry You need 2 x upper mount and 1 x lower mount.…
This is a ground pod, and camera gimbal for wildlife and macro photography. It is mostly 3D printed, and just requires a couple of bearings and some nuts and bolts. It is quite strong enough to hold my camera (~ 1.6 Kg) and I wouldn't…
I was unable to find a suitable model for an ELRS antenna holder that fits the GepRC Mark5, so I made my own. Additionally, I designed a version that allows for spacers, made of a more robust material like polycarbonate (PLA would…
Meanwell LRS-350 Mount + DIN rail mount. Coming with additional DIN rail mount (hole space 46mm). Mounting on two mounts with M4x8 hex screw. You can mount it on DIN rail or through hole to some base whatever you like :) Screw is standard…
DIN rail mount for MeanWell LRS-35 series power supplies. This aligns the bottom of the supply with my other LRS mounts. I have included STEP and FreeCAD sources if you want to modify.
DIN bracket for Meanwell LRS-350 -- DIN Rail Bracket https://www.printables.com/model/97222-din-rail-bracket By Fabian I modified to accept the 4mm SHCS - the holes are not exact but it works on the LRS-350 with some patience.
Center hole distance 55mm
LRS-350-24 Terminal Cover - Voron Edition - Designed for the Mean Well LRS-350-24 used in the Voron Switchwire. It even lets you more safely tweak the voltage adjustment without fear of tapping a hot terminal. Print it however you like.…
This is an enclosure for the Mean Well LRS-150 series power supply. Designed with YAPP , a parametric projectbox generator for OpenSCAD. There is a version with and without base mounts. You will need M3 screws to secure the power supply…
Mounting bracket LEFT and RIGHT for two Meanwell LRS200 or LRS350 Power Supply. Use M4 Bolts, Flat and Lock Washers. Print flat with large section on bed. I also design a similar kit for power supplies with dissimilar width (LRS200 or 350…
The newest version of my Lens Cap Holders. Now with more supported filter diameters. The following diameters are supported: Canon: 49mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon: 52mm/55mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon (extended):…
As I needed to mount my Meanwell LRS-150-48 PSU to my VCore3 printer, I designed this mount adapter. It doesn'r require supports of printed as seen in slicer pics. You need 3x M3 6mm BHCS bolts and one M3 heat-insert (best with 4.6mm OD…
This is a Meanwell LRS/RSP Mount for my DIN Rail Bracket. You can find the bracket here ! For the DIN Rail Bracket Mount you need M3 countersunk screws. For the Meanwell Power Supply you need M4 screws. 2023-03-16: - Bracket holes…
There is no shortage of covers for the Mean Well LRS-350 power supply, but I couldn't find one that was quite what I was looking for, so I decided to create my own. 2019/09/24: Added Fusion 360 Source Files Print instructions This design…
A small cover for the wiring terminals of the Meanwell RSP-320 power supply. Edit 08-2022: Thanks nosstromOS for confirming the compatibility with the LRS-200 power supply. Thanks Keith Chong for confirming the compatibility with the…
This is a remix of https://www.thingiverse.com/thing:2812350 (Mean Well LRS-350 version) with a few small modifications: The entire mount is shifted one millimeter in the positive X direction (based on a source comment) The vent side wall…
Modified the DIN bracket found in the Voron 2.4 Design - to mount to LRS-350 and clips to a 35mm DIN rail. M4 - 8mm bolts I tried to use the spring style DIN mount found on printables but the spring was not strong enough to hold the PSU…
Fits Mean Well LRS 350 PSU upgrade for SOVOL SV06.
I designed this PSU cover for the Mean Well LRS150-24 PSU. The model files contain one “normal” cover and one with the VORON Design logo (i originally designed this cover for my VORON v0.1). The Cover is secured with one M3x4mm screw.…
Inspired by a model I bought but which I was not happy with, as it required a ton of supports and could only rotate, not tilt. This model can tilt up and down and rotate. The tilt automatically locks in the up position and a small plunger…
LRS-350-24 Terminal Cover - Voron Switchwire BOM Compatible Edition - Designed for the Mean Well LRS-350-24 used in the Voron Switchwire. This is an updated version for anyone building a BOM Voron Switchwire, added notches to allow the…
5 Ruthex M3 heat inserts are needed Print Settings Printer: Voron 2.4 Rafts: No Supports: No Resolution: 0.20 Infill: 25 Filament: ESUN ABS+ ABS Category: Electronics
DIN rail mount and terminal cover for the WEHO LRS-250 PSU. (might fit other models, Meanwell LRS-200 series seems to have the same dimensions). Terminal cover can be opened without tools. Prints without supports. Printed in PETG at layer…
Designed this simple cover for Meanwell LRS-75-12 model but should work for 24V model as well. Fast and easy print. Protects the terminals from the top, but shouldn't interfere with the wires themselves. You can print it at 0.3 (Draft)…
Wanted to have my PSU mounted* directly to my Rook using original MK1 parts. It makes it easier to move around even though it becomes a bit heavier. I've only made a version that mounts on the right side, but I can make a left version if…
I looked for a different type of mounting on the DIN rail than is used in the official release of Voron parts - I was not at all satisfied with the type and design ☹ For the DIN Rail Bracket Mount you need M3x10 countersunk screws.
This is a dual-antenna, GPS and 2.4GHz elrs antenna mount designed for the 7/8/9/10inch Mark4 V2 frame. Antenna used: Foxeer Lollipop V4 Gps used: HGLRC M100, It may also be compatible with other GPS modules. The mount is ideal for…
The terminals on the Mean Well LRS-350 series PSU are not covered. This fixes that. It will not prevent short or shocks when poking around with a screenshot driver or other conductive items, but at least you won't accidentally touch them.…
Like my other two versions (the picture shows actually the TBS SourceOne version) an antenna mount for the 2.4GHz ExpressLRS T-Antenna. The holes have a diameter of 5mm and the distance (center-center) is 24mm. Should fit on the standoffs…
Update: New tuned version available, find out more http://qczek.beyondrc.com/lrs-moxon-antenna-v2-tuned/ Just a frame for DIY Moxon atenna. Find out more on my blog http://qczek.beyondrc.com/moxon-antenna-for-lrs-tx/ Just uploaded…
Hardware needed to install Cap/Button Screw M4x6 - 8pcs (Screw on PSU) Cap/Button Screw M5x10 - 2pcs T Slot Nut 2020 M5 - 2pcs Factory power supply mount screws - 2pcs Print as oriented in the slicer picture. Print 2 brackets and one…
Feb 10, 2024 : STEP file added. -- Print details: Material: PLA, PETG, ABS, or any filament you like. I use Overture PETG Black. layer height: 0.20mm Supports: You only need support for the big hole. I recommend to use Paint-on supports.…
The stock PSU on my Creality Ender-3 needed to be replaced, so I swapped in a Meanwell LRS-350-24. I couldn't find a cover that quite fit the Ender-3's arrangement, so I created this. You will likely have to bend the terminals/wires for…
BC-250 Case modified for LRS-350-12 PSU(and AC-01 Socket), and fan mesh. The difference of v1 and v2. v1 has AC-01 socket on Front Shell. v1.1 update: Improved AC-01 socket fit to Front Shell.(No changes on Rear Shell) v2 has AC-01 socket…
Remix of D!nu's Meanwell LRS-200 DIN Rail Mounts resized for the V-Core 300. Sized to fit on the top two DIN Rails in a standard V-Core 300 layout (see photos). Also works with the Meanwell LRS-350. If you need mounts for the DIN Rails…
When redesigning my Anet AM8 I switched it to a 24V system. As such I designed this mount for the LRS-350-24 PSU to fit my needs. It uses m4*8mm cap head screws to secure to the PSU, m3 cap head screws and lock nuts to secure the mains…
canopy and batteyr holder for the analog version of the V2 firefly nano. this has the holder for an elrs receiver.
Hardware needed to install Cap/Button Screw M4x6 - 8pcs (Screw on PSU) Cap/Button Screw M5x10 - 2pcs T Slot Nut 2020 M5 - 2pcs Cap/Button Screw M4x30 - 1pcs (M4 Washer maybe needed) Print Settings Material: PETG Infill: 30% Perimeter: 3…
Mein erster Versuch einen Walksnail/ELRS Antennen Mount für einen GepRC Mark4 Frame zu konstruieren. My first attempt at constructing a Walksnail/ELRS antenna mount for an GepRC Mark4 frame. Print Settings Printer Brand: Creality Printer:…
DIN 35mm brackets for Meanwell LRS 150-24 power supply unit Easy to print and use DIN 35mm brackets for Meanwell LRS 150-24 power supply unit. BOM (Bill of Materials) Mechanical parts QTY Bolts: M3x8 SHCS | Source: [Link] — or — M3x8 BHCS…
I wanted to mount the HLGRC M100-5883 10th-gen GPS module to my GEPRC MK5D frame (Deadcat version). I could not find any mounts that use the stock antenna mounts, allowing for easy ELRS antenna and DJI O3 antenna fitting. Therefore I made…
L-bracket I made for Canon 5D Mark II-IV and 6D, but it should fit other DSLRs as well. Printed this in Carbonfiber PETG 5 layers all around and 50% triangle infill. After printing snap off the support and the lower bars on the arca style…
Here's a set of clips for mounting an LRS power supply perpendicular to the DIN rails in your Voron or similar printer. DIN rail spacing is at the Voron standard of 185mm edge to edge . BOM 4x M4 x 6mm BHCS Print List 2x DIN Clip A 2x DIN…
A quite universal (requires 4xM4x10 bolts and 4xM4 screws) mount for Meanwell-LRS-350 series PSU. Holding screws are hidden within the mount for hers&your pleasure (aesthetic lvl over 9000) in a pocket slanted 40 degrees. I'd suggest at…
I designed this adapter since I wasn't satisfied with the online available ones. I am using a Nazgul5 V2 with its XL5 V5 frame and an ExpressLRS 2.4GHz T-Antenna by HappyModel. To get the antenna into the printed part you might have to…
Modification of the Original part deleting the silly power plug hole. Just unhook the PSU cable from the fan and route it through the fan hole. You should shorten the cable and reuse the sleeve from the Original fan anyway for safety. I…
Remixed to use the ZeroG project's logo instead of Voron. This should in theory work with other 115mm width PSUs provided they also have the same terminal spacing, etc. If you find one, let me know and I'll add here to help others find it…
This is a remix of DIN clips for Meanwell LRS 200 PSU by neon.blue
Designed to fit Mean Well LRS 350. Print Orientation: Face down Mounting Hardware: Dig Quad to mount 4x - Spacer 4x - M2.5 - 12mm Bolt 4x - M2.5 - Washer 4x - M2.5 - Nut Mount to PSU 2x - M4 - 8mm Flat head bolts (Button head also works)
DIN rail mount for a MeanWell LRS-200 series power supply to mount to the center and upper rails of a RatRig V-Core 3.1 500mm3. This aligns the bottom of the supply with my other LRS series mounts. You will need to print 2, one of them…
Voron style, simple DIN rail mount for meanwell PSU (other brands with 50mm threads space work's too) Printed from ASA but propably all filament types will be good
use the trimmed vtx mount to have room for both fits as one assembly
4 copies of the bracket can be used (be sure to mirror 2 when printing) or use 2 copies of the bracket with the strap if you are using some covering for the terminal side of the PSU. Brackets have a small lip to prevent PSU from sliding.…
I wanted to reuse a Mean Well LRS-350-24 24V power supply on the bench for another project, so made this simple cover to hide the connectors and protect from the exposed mains voltage. Printed in PETG (for strength and temperature…
This is an enclosure designed to fit closely to a Meanwell LRS-100-5 power supply, and to house a NodeMCU Base PCB. My objective was to have a neat, all-in-one enclosure for all I need to run the excellent WLED "Neopixel" addressable LED…
It is designed for the DIN rail distance (101.0mm) between of the DIN rails mounted on the electronics panel of a 400mm RatRig V-CORE 3.0 and 3.1. It will not fit other dimensions of the V-CORE! For assembly you need: 4x M4x10mm Cap Head…
FPV SpeedyBee Mario 5 Custom TPU with follow parts: XT60 iFlight BLITZ M10 GPS V2 2 x SMA vertikal ELRS Antenna mount Short Video about this model you can find hier:
Meanwell LRS-350 enclosure for bear 2.1 frame with additional RS-25 power block. This parts can be usefull if you want to power your Raspberry or led strip lights with different voltage than the main LRS block has.…
two types of antenna mounts ExpressLRS
Printed template for DIY small 868MHz / 915MHz antenna. Total size 26x6mm alternative to 160mm dipole. Use 0.7mm wire to make the antenna spring. Use coaxial IPEX4 antenna cable, solder active, central wire to the spring (no passive part…
Geprc Mark4 ELRS Reciever Holder
About This is a useful enclosure for a Meanwell LRS-50-5 PSU Power Supply. It serves two main purposes: Provides increased safety and protection, by adding an insulating cover (with ventilation holes) and leaving only the minimum required…
Introduction This model incorporates design elements from https://www.thingiverse.com/thing:3082178 which was designed for the discontinued Meanwell NES-350-24 . I like the design for its simplicity, rear-facing AC/Mains receptacle, and…
This is a small cover designed to cover the terminals of the LRS-100 power supply to prevent contact with fingers and tools when in use. (Confirmed on an LRS-100-5, but likely works with others as well.) This has been remixed so that the…
About Meanwell LRS-350-24 PSU Case This is DIN rail mountable (and standalone) case with protection cover for Meanwell LRS-350-24 PSU. This case is designed primarily as an accessory for The RIG — a DIY workstation stand for testing…
20mm tall, 5mm hex standoff. elrs rp1 rp3
Fix for gaps in the original model through fusion 360
This version allows the LRS 100 series to be rotated 90º & -90º or in its original orientation. It also improves print-ability of the original holes. You only insert the heatset inserts you need for the orientation you want. Additionally,…
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
An aesthetic and functional way to put the antennas of your Elrs Diversity receiver on your Hee Wing T1 Ranger. It is recommended to print on a flexible material, but it is also possible to print on PETG.
Modified to include ridges on the side so when its slipped on the power supply it stays in place both horizontally and vertically. If you print to use and try to slip the cover from above you will break the side tabs. For best use, slide…
In order to avoid accidental contact with the terminals on a Meanwell power supply, I've put together a quick cover that clips over top of the terminals once everything is set up. Two versions are provided: a longer one for LRS-350 power…
Basic mount for the T style 2.4GHz dipole antenna that comes with the Radiomaster RP1 & RP3 ExpressLRS receivers. This design uses M3 heat set inserts with a hole spacing of 29.5mm & is designed to mount flush against a 3mm thick piece of…
UPDATE 6/9/2020: Added V3 which moves the vent up 20mm to improve compatibility with certain frame mounts. You can use the v2 fan cover with this lid as the only change is moving up the vent. UPDATE 2/20/19: I have added a V2 of the cover…
Always good to be safe. This is a cover for the input/output terminals on a Mean Well LRS-150-12 power supply. It snaps in place and may help prevent forest fires. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
This is an adapter to hang the Meanwell LRS-200-24 onto the DIN rail of a RatRig V-Core3 400mm. It should be printed twice, one mirrored (see picture). It doesn't require supports. It is designed for the DIN rail distance (137.5mm)…
Easy and quick print.
As with the original, only fits the Vcore3-400 spacing as defined by the spacing between the mounting holes in drawing for the backplate. I also fixed an incomplete fillet and removed the descriptive text on the side as it seemed to add…
step file included with finishing fillets removed. go nuts rear cover is meant to be held on with dabs of glue.
Designed to cover the wiring connections on a Mean Well LRS-350-24 power supply and provide a mounting location for an IEC320 inlet socket. Specifically designed for this power connector:…
Its my first try to build a mount like this, maybe some newer version will follow. Printed in TPU.
The side of the original was too thick to slide into my LRS-350-48 so here is the modified version. The top has also increased 1.7mm so that it should shorten the gap that you see in my photo. Category: 3D Printer Accessories
Noctua NF-A9-14 90mm fan cover for Meanwell PSU. Although intermittent, the stock fan on the Meanwell LRS 350W is loud when running. Switching it out for a 90mm noctua fan significantly reduced the fan noise. I've reduced the hex mesh…
Safely stack the Meanwell Power supplies. This was originally created to stack power supplies in a CG1500 box. The addition of a terminal cover to help prevent fingers or objects accidentally touching live terminals (does not account for…
I created a power supply enclosure to house my Mean Well LRS-100-5 5VDC Power Supply. The design concept was to create an enclosure that could connect externally to my Raspberry Pi 4 based 2 Person Arcade Flight Deck. The enclosure…
Why? I needed a slimline mounting solution to mount a Meanwell LRS 100-5 to a 35mm DIN Rail, printable on the limited space of a Voron 0.1 Features: Uses the PSU Brackets of the Voron Trident, privided below Provides a 4 point…
Why? I needed a slimline mounting solution to mount a Meanwell LRS 150-48 to a 35mm DIN Rail, printable on the limited space of a Voron 0.1 Features: Uses the PSU Brackets of the Voron Trident, privided below Two part design to be…
Simple yet effective and secure tailboom antenna mount for T-antennas like the TBS Immortal T. Printed in PETG which is more flexible and durable than PLA. If you like my designs please consider donating a coffee or any amount really, I…
Printed in ABS / ASA without support.
A modification to the boxer to have a much smaller ELRS antenna. This modification requires you to open the radio to change the internal connection. Any damage is solely responsibility of the person opening the radio. Installation…
elrs vertical mount hole is 6.1mm length 25mm you can modify it
This is a remix of the official ExpressLRS JR module bay. I noticed that the official one didn't fully lock into the JR module slot, and after a bit of tinkering I found out that the little clip is way too long, and doesn't engage with…
The Mean Well LRS-600-24 is using a 12V fan, so it can be easily replaced with a quiet one, like a Noctua (you'll need an adapter for the JST PH 2.54 2PIN connectors) Two possibilities: LRS-600-24.STL : the fan is INSIDE (with grid). You…
I created a safety bracket for the Meanwell LRS-150-48 PSU which protects the power terminals from being touched by mistake.
