1 / 4
WEHO LRS-250m DIN rail mount and terminal cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN rail mount and terminal cover for WEHO LRS-250 PSU
- Ocena
- 4,75 / 5
- Polubienia
- 36
- Pobrania
- 376
- Wydruki
- 5
- Wyświetlenia
- 1650
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 5) (Komentarze: 8)Remiksy (0)Kolekcje (102)Powiązane
DIN rail mount and terminal cover for the WEHO LRS-250 PSU. (might fit other models, Meanwell LRS-200 series seems to have the same dimensions).
Terminal cover can be opened without tools.
Prints without supports.
Printed in PETG at layer height 0.2mm.
DIN Rail Mount is based on the Voron DIN rail clip. (https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/pcb_din_clip_x3.stl)
Hardware needed:
- M4 bolts for the DIN rail mount, 2x M4x8 mm
- M4 countersunk bolts for the DIN rail mount, 2x M4x8 mm
- M4 bolts and washers for the terminal cover, 2x M4x8 mm