1 / 12
ESP 8266 Lolin V3 with 1,8" TFT - housing without screws — zdjęcie 1
1 / 12

ESP 8266 Lolin V3 with 1,8" TFT - housing without screws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

(Deutscher Text weiter unten)Hi!This is a housing for an ESP 8266 Lolin V3 with a 1.8 inch TFT display. No screws are…

Ocena
5 / 5
Polubienia
6
Pobrania
58
Wydruki
1
Wyświetlenia
316
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

(Deutscher Text weiter unten)

Hi! This is a housing for an ESP 8266 Lolin V3 with a 1.8 inch TFT display. No screws are needed. The ESP is first placed on the bracket and fitted into the housing. Then the display mount goes on top. The display is inserted, and then finally the lid is clipped in.

The lid and brackets should be printed at 25mm/s.

Hi! Das ist ein Gehäuse für einen ESP 8266 Lolin V3 mit einem 1,8 zoll TFT display. Es werden keine Schrauben benötigt. Der ESP wird zuerst auf die Halterung gesetzt und in das Gehäuse eingepasst. Dann kommt die Displayhalterung oben drauf. Das Display wird eingesetzt, und dann zum Schluss wird der Deckel eingeclippt.

Deckel und Halterungen sollten mit 25mm/s gedruckt werden.

Display: https://www.az-delivery.de/products/1-8-zoll-spi-tft-display 
ESP: https://www.az-delivery.de/products/copy-of-nodemcu-lua-amica-v2-modul-mit-esp8266-12e

Print Settings

Printer Brand:

Anycubic

Printer: 

All-metal Mega

**Rafts:**

No

Supports: 

Yes

**Resolution:**

0,2mm

Infill: 

2

**Filament:** Anycubic PLA grey

 

 

 

Category: Electronics

Tagi