ESP 8266 Lolin V3 with 1,8" TFT - housing without screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
(Deutscher Text weiter unten)Hi!This is a housing for an ESP 8266 Lolin V3 with a 1.8 inch TFT display. No screws are…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 58
- Makes
- 1
- Views
- 316
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
(Deutscher Text weiter unten)
Hi! This is a housing for an ESP 8266 Lolin V3 with a 1.8 inch TFT display. No screws are needed. The ESP is first placed on the bracket and fitted into the housing. Then the display mount goes on top. The display is inserted, and then finally the lid is clipped in.
The lid and brackets should be printed at 25mm/s.
Hi! Das ist ein Gehäuse für einen ESP 8266 Lolin V3 mit einem 1,8 zoll TFT display. Es werden keine Schrauben benötigt. Der ESP wird zuerst auf die Halterung gesetzt und in das Gehäuse eingepasst. Dann kommt die Displayhalterung oben drauf. Das Display wird eingesetzt, und dann zum Schluss wird der Deckel eingeclippt.
Deckel und Halterungen sollten mit 25mm/s gedruckt werden.
Display: https://www.az-delivery.de/products/1-8-zoll-spi-tft-display
ESP: https://www.az-delivery.de/products/copy-of-nodemcu-lua-amica-v2-modul-mit-esp8266-12e
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
**Rafts:**
No
Supports:
Yes
**Resolution:**
0,2mm
Infill:
2
**Filament:** Anycubic PLA grey
Category: Electronics