1 / 3
Bosch GKT 55 GCE 32MM (Numatic Henry) vacuum adapter — zdjęcie 1
1 / 3

Bosch GKT 55 GCE 32MM (Numatic Henry) vacuum adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to fit a 32mm internal diameter vacuum onto the Bosch GKT 55 GCE

Ocena
0 / 5
Polubienia
3
Pobrania
27
Wydruki
0
Wyświetlenia
188
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

An adapter I designed to fit my Numatic vacuum to my Bosch saw. 

My print was a bit too tight so I added two slight tapers. May still require a bit of sanding, but a tight fit is desirable of course. 

Make sure to print it vertically and with the curved transitions facing down. That's by far the easiest. Should not require any supports. 

Tagi