1 / 1
Airtag mount for BTwin Tilt 500 (parametric f3d file) — zdjęcie 1

Airtag mount for BTwin Tilt 500 (parametric f3d file)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a mount to secure your airtag under the BTwin Tilt 500 and comes with customisable design files

Ocena
5 / 5
Polubienia
16
Pobrania
149
Wydruki
4
Wyświetlenia
1157
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an easy print that will allow you to secure an airtag to your bike. You will need 4 15mm M2 screws and nut to assemble it

I have provided design files so you can fit it to a different saddle, the desing has 3 adjustable parameters:

  • spoke_diameter = the diameter of the rods holding the saddle
  • spoke_distance = distance between the rods' centers where they mount to the post
  • spoke_angle = angle between the 2 posts

Tagi