Filament dry box label system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A thin, interchangeable label system for filament dry boxes (and other storage).
- Ocena
- 4 / 5
- Polubienia
- 14
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 650
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
There are a lot of filament dry box label holders out there, but they are all pretty bulky. This label system is right-sized, thin (4mm), legible and easy to use with interchangeable slide-in, slide-out labels. There are pre-printed label models for most filament types, a blank label you can add your own text to and some labels for Polymaker® and Overture® filaments.
The photos show the label system mounted on Rubbermaid® 21-cup storage containers (the excellent filament dry box by tkostandyan5), but would likely fit on many similar air-tight containers, as well as other storage boxes.
Print Settings
Print without supports.
Slicer: AnkerMake Studio
Printer: AnkerMake M5C
Filament: PLA
Nozzle: 0.4mm
Layer height: 0.2mm
Infill: Not used due to thinness, choose any
Brim: None
Time: 10m (one label and one holder)
Consumables: 1.21m 3.62g filament
Tips
You can easily print these labels in two colors (as pictured), with the text printed in a contrasting color, even on a single-filament printer. Add a G-code Pause command at layer 6 in AnkerMake Studio (will be layer 5 in Cura and other slicers) and perform your filament color change. The text is 2mm high.
I affixed the label holders to the Rubbermaid® containers using thick cyanoacrylate glue, and this works well. You could also mount with some 3M removeable double-sided foam tape cut to size.