Parametric Harbor Breeze Meshtastic Mounting Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric antenna mounting arm for Harbor Breeze 60LM Solar light to turn it in to a Meshtastic solar node.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use the Harbor Breeze Meshtastic Mounting Arm with almost any antenna! If your antenna does not fit, simply update the Arm.Parametric.f3d file with your measurements and instantly customize it to your needs.
Instructions
Select the file to print
If
Arm.16x22.5is compatible (see Compatibility section) with your antenna, use this fileIf your antenna is not compatible, modify the User Parameters in Fusion360 (refer to the gif in the photo gallery above) according to your antenna's measurements
Print the arm
Affix the arm to the solar panel with the bolt and nut from the original mount
Slide the arm and solar panel assembly onto the Dovetail from the original model
Compatibility
Name | Thread Major Diameter | Base Diameter | File to Use | Compatible |
|---|---|---|---|---|
UFL (IPEX/IPX) Mini PCI to N-Female Bulkhead Pigtail Cable Extension (8") | 16mm | 22.5mm | 📂 Arm.16x22.5 | ✅ |
Anything else | ? | ? | 📂 Arm.Parametric | ✅ (You have to update the User Parameters) |
(Tested on Bambu P1S)
Filament: PLA
Brim: 5mm (Outer only)
Infill: 25%
Supports: None
I used the auto-rotate feature in Bambu Studio