1 / 5
QIDI Plus 4 Knomi Cover — zdjęcie 1
1 / 5

QIDI Plus 4 Knomi Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Full remodeled cover to fit Knomi V1

Ocena
0 / 5
Polubienia
34
Pobrania
89
Wydruki
1
Wyświetlenia
1278
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This cover fits Knomi V1 only

It can be use  only with MY BEACON mod or without (except that it will have the extra small side cover for the beacon JST plug.)

The cover as already some  “BREAK-OFF”  supports to help you out with the print. Simply manually add TREES on edges or use the 3mf file.

I added the FULL 3mf from Orca settings in ABS

Replaced the small magnets with 6X3

Also added the Knomi-Housing Jig STEP file if you want to make your own cover.

Have fun and for more info on the install, i will make a TUTO on my Github

https://github.com/FxWoody/Qidi-Plus-4-Mods/tree/main/KNOMI

SETTINGS:

Layer Height: 0.14~0.2

3 walls

3 Top-Bottom

20% infill Gyroid

ABS/ASA/PETG-CF …. NO PLA!!!

Tagi