QIDI Plus 4 Knomi Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Full remodeled cover to fit Knomi V1
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 89
- Makes
- 1
- Views
- 1,278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This cover fits Knomi V1 only
It can be use only with MY BEACON mod or without (except that it will have the extra small side cover for the beacon JST plug.)
The cover as already some “BREAK-OFF” supports to help you out with the print. Simply manually add TREES on edges or use the 3mf file.
I added the FULL 3mf from Orca settings in ABS
Replaced the small magnets with 6X3
Also added the Knomi-Housing Jig STEP file if you want to make your own cover.
Have fun and for more info on the install, i will make a TUTO on my Github
https://github.com/FxWoody/Qidi-Plus-4-Mods/tree/main/KNOMI
SETTINGS:
Layer Height: 0.14~0.2
3 walls
3 Top-Bottom
20% infill Gyroid
ABS/ASA/PETG-CF …. NO PLA!!!