1 / 4
Spare part for large air filter housing with M16 thread — zdjęcie 1
1 / 4

Spare part for large air filter housing with M16 thread

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No need to re-print the whole part, after the Thread was broken. Changed Diameter for Scheppach Compressor witrh M16

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Due to the alignment during printing, the threads unfortunately break off quickly and the head gets very warm for PETG. So I printed a fitting piece with an M16 thread from ABS, which I put on the existing housing.
I also stabilized it with a short aluminium tube with an outer diameter of 12 mm. This turns “just now” into a full-blown project. But the replacement of the “silencer” supplied justifies the conversion. 

The filter inserts are available from Aliexpress for less than three euros.