1 / 4
Spare part for large air filter housing with M16 thread — image 1
1 / 4

Spare part for large air filter housing with M16 thread

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

No need to re-print the whole part, after the Thread was broken. Changed Diameter for Scheppach Compressor witrh M16

Rating
0 / 5
Likes
1
Downloads
12
Makes
0
Views
82
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Due to the alignment during printing, the threads unfortunately break off quickly and the head gets very warm for PETG. So I printed a fitting piece with an M16 thread from ABS, which I put on the existing housing.
I also stabilized it with a short aluminium tube with an outer diameter of 12 mm. This turns “just now” into a full-blown project. But the replacement of the “silencer” supplied justifies the conversion. 

The filter inserts are available from Aliexpress for less than three euros.