G2SA Sensor Adaptation for XOL2 toolhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remake of previous model to have pre/post sensor support in the G2SA
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This rethink of the original model incorporates sensor support for pre and post extruder, I made it to try and take advantage of the new auto-calibration features in Happy Hare.
Uses 5mm ball bearings, some PFTE tubing, microswitches
The sensor base uses a cut PFTE tube, 5-6mm section removed (in a sort of “U” shape) to allow the ball bearing to interact with the filament as it comes through
This has been tested to work with my set up now however it did take multiple iterations of where to put the sensors/how to cut the tube.
EDIT I have recently found XOL metrix filament cutter and toolhead sensor adaptation to the XOL extruder block. I find it to be a better design than this.
https://github.com/SouthAsh1/Xol-metrix