Fiesta MK8/8.5/9 multi phone bracket/holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compared to the original, i have made the bracket just a tiny bit wider, and split it up into three parts
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I often swap phones, so i needed an easy way to also create a holder for another phone, without having to print the hole holder again.
I've provided models for two phones: Samsung Z Fold 3 and Samsung Galaxy S23
Example photos are Prusament Galaxy Black PETG.
Printed on a MK4S at 0.2mm layer height with the speed profile, and 3 walls. Rest is default
The tolerance when connecting the parts are tight, but not too tight, and not lose enough that your phones wont feel held in place
03/06/2025 : Added 3 more holders. For Samsung Galaxy Note9, S9 and S10e
17/06/2026 : Added OBJ files for each phone holder model