1 / 9
Royal Enfield Classic 500/350 Luggage Rack — zdjęcie 1
1 / 9

Royal Enfield Classic 500/350 Luggage Rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Works great since spring 2024 :)

Ocena
0 / 5
Polubienia
6
Pobrania
23
Wydruki
0
Wyświetlenia
313
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The luggage rack is screwed onto the existing carrier of the rear seat; to do this, the rear seat cushion must be unscrewed. You will need:

  • 6x M8 screws
  • 4x M8 ring nuts
  • 2x M6 screws with nuts
  • One rubber-coated pipe clamp

I have been using the luggage rack since spring 2024, and it still holds up perfectly today (one year later). I used PETG, and even in summer heat and sunshine, it worked without any issues.
The texts were added in the slicer and are not part of the STL file.

To file/saw the sheet metal, I recommend printing a radius template, which you can find plenty of on Printables… you need 25mm. Alternatively, a thin wooden plate or similar can also be used.

Tagi