1 / 9
Royal Enfield Classic 500/350 Luggage Rack — image 1
1 / 9

Royal Enfield Classic 500/350 Luggage Rack

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Works great since spring 2024 :)

Rating
0 / 5
Likes
6
Downloads
23
Makes
0
Views
315
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

The luggage rack is screwed onto the existing carrier of the rear seat; to do this, the rear seat cushion must be unscrewed. You will need:

  • 6x M8 screws
  • 4x M8 ring nuts
  • 2x M6 screws with nuts
  • One rubber-coated pipe clamp

I have been using the luggage rack since spring 2024, and it still holds up perfectly today (one year later). I used PETG, and even in summer heat and sunshine, it worked without any issues.
The texts were added in the slicer and are not part of the STL file.

To file/saw the sheet metal, I recommend printing a radius template, which you can find plenty of on Printables… you need 25mm. Alternatively, a thin wooden plate or similar can also be used.

Tags