Vesa Wall Mount - 02
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To easily attach a small PC to the wall Via Vesa mounts 100x100
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 433
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
wanted to try a wall mount which would make it easier to take the computer off the wall.
so I designed this hanger.
takes roughly 3 hours to print...
NEED:
4x - M4x10mm buttonheads
2x - 2.5" drywall screws
I advise finding a stud for the two drywall screws
its designed to snap fit so it shouldn't be readily removable but still easier than finding a drill and taking out two screws. if you find it snap fits too tight… maybe sand the bump down a bit you can test fit it backwards before committing. i do not recommend putting the back part in all the way when not attached to a wall or something…
.f3d file for those that need it :)
***Edit*** did minor updates to files they are all new.