1 / 1
Watertank fitting with JSN-SR04T level sensor & optional Pump Power Cable Cutout
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2-Inch Buttress Threaded Water Tank Fitting for JSN-SR04T & optional Pump Power Cable Cutout
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
This is a 3D-printable adapter designed for water tanks with a 2-inch buttress thread. The design features:
- A hole to accommodate the JSN-SR04T ultrasonic sensor for water level measurement.
- A passthrough for a 30mm water hose
- A passthrough for a power cable, for powering a submersible pump
- A tight-fitting cap to ensure a secure and splash-resistant seal.
This adapter is perfect for integrating smart water level monitoring and pump control into your setup while maintaining a clean and functional installation.
Print recommendations:
- Material: PETG or ABS for outdoor/water-resistant applications.
- Layer height: 0.2mm for a good balance between strength and detail.
- Infill: 40% or higher for durability.
- Supports: Minimal supports may be required for overhangs.