1 / 1
Watertank fitting with JSN-SR04T level sensor & optional Pump Power Cable Cutout
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2-Inch Buttress Threaded Water Tank Fitting for JSN-SR04T & optional Pump Power Cable Cutout
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
This is a 3D-printable adapter designed for water tanks with a 2-inch buttress thread. The design features:
- A hole to accommodate the JSN-SR04T ultrasonic sensor for water level measurement.
- A passthrough for a 30mm water hose
- A passthrough for a power cable, for powering a submersible pump
- A tight-fitting cap to ensure a secure and splash-resistant seal.
This adapter is perfect for integrating smart water level monitoring and pump control into your setup while maintaining a clean and functional installation.
Print recommendations:
- Material: PETG or ABS for outdoor/water-resistant applications.
- Layer height: 0.2mm for a good balance between strength and detail.
- Infill: 40% or higher for durability.
- Supports: Minimal supports may be required for overhangs.