1 / 5
3U 19" Server rack VESA 100 monitor mount — zdjęcie 1
1 / 5

3U 19" Server rack VESA 100 monitor mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

VESA 100 compatible monitor mount for 19" server racks

Ocena
5 / 5
Polubienia
83
Pobrania
345
Wydruki
2
Wyświetlenia
2735
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

Description

I had a 24" monitor sitting idle and, as it happens, a 42U server rack at home. (Yes, not exactly standard apartment furniture, but here we are.) The idea struck: hang the monitor inside the server rack. This design came to life as a practical solution for repurposing the monitor.

Technical Details

  • Rack Type: 19-inch server rack
  • Space Used: 3U
  • Material: PLA (recommended: PETG)
  • Compatibility: VESA 100x100
  • Flexibility/Durability: Slight flex back and forth, but stable under vertical loads
  • Printing Instructions: Designed to fit on a 256x256 bed. The model is printed in two identical halves; print the same model twice.
  • There is also a small plate variation for smaller print plates.

This mount was printed using PLA, though PETG would be a superior material for increased durability. To ensure strength, I suggest increasing the wall count and infill density. The result is a mount far sturdier than anticipated. While there’s a slight flex back and forth, the model is designed to handle vertical loads, so it remains stable and robust in its intended use.

Tagi