Jars w/screw lid (Multiple Sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple jar with a screw lid. Multiple diameters and heights uploaded. Contact me if you want a specific size.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Models are structured by the diameter of the jar. The height is for the base model. Total height of the jar is H + 14 mm (see image below).
Files are organized in folder by the diameter of the jar, there you will find the lid and all the heights. The base height for all models are currently in 50 mm, 75 mm, 100 mm and 150 mm (TH).
Please let me know if you are looking for other sizes, it should be easy to add.
The model(s) on the pictures is printed with the following settings
| Material | Bambu PLA Basic |
|---|---|
| Infill | 15% |
| Infill Pattern | Gyroid |
| Supports | No |
| Orientation | As loaded from file |
| Adhesion | Not needed |
Commercial usage of my models are prohibited without an agreement. If you wish to use any of my models commercially, please send me a message.
| Date | Comment |
| 2025-08-17 | Published model |
| 2025-08-23 | Added additional tags for listing |
Please message me if you have any questions, ideas or improvements to any of my models.