Tacx bottle-nipple push-out tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nipple-remover for bottles manufactured by Tacx (sold also as Asics, Cykloteket, Maurten, Crescent, etc. brands).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I was inspired by a nipple-remover for Bontrager bottles, but as my bottles have been manufactured by Tacx, so I designed a compatible one.
Usage instructions (cf. the photos):
1. Press down the nipple
2. Position the tool so that its protrusion fits the groove of the nipple mount
3. Press down the tool so that the nipple's bumpersis forced inside of the hollow of the tool and paying attention to the tool's rotation to fit the tool into the groove of the cap
4. If you are successful, then the tool is sunk down to the bottom and the nipple is forced inside the tool, so that bumpers of the nipple are pressed inwards
5. Carefully pull out the nipple. It will fit very snug/tight , so pull slowly, carefully while slightly rocking the nipple if needed,