Tacx bottle-nipple push-out tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nipple-remover for bottles manufactured by Tacx (sold also as Asics, Cykloteket, Maurten, Crescent, etc. brands).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I was inspired by a nipple-remover for Bontrager bottles, but as my bottles have been manufactured by Tacx, so I designed a compatible one.
Usage instructions (cf. the photos):
1. Press down the nipple
2. Position the tool so that its protrusion fits the groove of the nipple mount
3. Press down the tool so that the nipple's bumpersis forced inside of the hollow of the tool and paying attention to the tool's rotation to fit the tool into the groove of the cap
4. If you are successful, then the tool is sunk down to the bottom and the nipple is forced inside the tool, so that bumpers of the nipple are pressed inwards
5. Carefully pull out the nipple. It will fit very snug/tight , so pull slowly, carefully while slightly rocking the nipple if needed,