split radial ball bearing M3x6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
radial ball bearing split for 3D printing, uses 6mm Airsoft BBs
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Similar to my "split radial ball bearing 4-40 x 3/8" but with metric screws, this ball bearing is designed in 4 sections so it could be printed with the raceway of each section facing up for a smooth surface. The ball bearings are assembled between the top an bottom sections so there is no need for a hole and plug.
Assemble with 6mm Airsoft BBs and M3x6 socket head screw and nuts.
inner diameter = 20mm
raceway diameter = 40mm
outer diameter = 60mm
height = 10mm
gap = 0.5 mm
material PLA
print settings: 0.10mm DETAIL
infill = 25% gyroid
seam position = random
bed temp = 70C
enable ironing, topmost surface only - ironing only enabled on single part prints, not on 4x print.
model available at:
https://cad.onshape.com/documents/a8eea2a038286208726b4796/w/7eeb13e0eb6e4ea23775f07b/e/fccdd21a9ece4f2b1614954f?renderMode=0&uiState=67bad06dfd9b866452c275d8
update: added color section view