1 / 3
Ender 3 S1 Sprite Extruder Fan Shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix for some addons from Maxim
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 130
- Wydruki
- 2
- Wyświetlenia
- 995
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 9)Remiksy (0)Kolekcje (34)Powiązane
- No supports
- PETG
- Configs for klipper:
- bltouch offset
x 47
y 1.5 - safe home
x 162
y 116.5 - mesh min
x 20
y 20 - mesh max
x 199
y 210 - x endstop
min -5
max 247 - y endstop
min -2
max 238
- bltouch offset
Multicolor layer change at 3rd layer if you are printing at 0.2mm layer height

Upgrades:
- Infill in creality letters for multicolor print.
- Side hex pattern for better air flow.
- Snap pressure assemble instead of magnets and side lever holes for dissasembling ease.
- Base modification on magnet's holes for more depth in snap inserts.
- CR-Touch base simpler and robust and no extra nuts needed, I modify the holes to fit the M3 screws directly.
- Base modifications for little adjustment on base position.