Divider insert for DEWALT ToughCase+ DWASTCASEBLK and DWAN2190
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a divider insert for the DEWALT ToughCase+ bit cases
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a divider insert for the DEWALT ToughCase+ bit cases
It's suitable for separating small parts like m3 screws and nuts but thin objects like m3 washers will slide under the dividers
I've tested this with DWASTCASEBLK and DWAN2190
- https://www.amazon.com/dp/B0BB162LNC
- https://www.amazon.com/dp/B07Z6XBYJT
I recommend using a hard TPU filament, for example Priline 98a, printed with at least two perimeters
- https://www.amazon.com/dp/B074DV9JMX
If the insert is too loose, try increasing the number of perimeters or scaling in the Y direction by 101%
Please download, leave a review, and donate on whatever platforms are handy if you like my work