1 / 4
Spooly - Anycubic Kobra S1 side spool mount/hanger with bearings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to hang a spool of filament on the side of the printer easily
- Ocena
- 5 / 5
- Polubienia
- 111
- Pobrania
- 743
- Wydruki
- 2
- Wyświetlenia
- 4541
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 8)Remiksy (0)Kolekcje (167)Powiązane
Anycubic Kobra S1 side spool mount/hanger with bearings.
This is a side mounted spool holder which incorporates 4 x 608ZZ bearings to give least resistance.
It has a lip that fits between the lid and case snugly and securely (make sure it's seated!)
Just mount the spool and feed it around the back into the tube.
It's in two parts, the hanger (needs some tree supports) and the bearing mount (I ended up printing it upright with tree support!)
Note: It hangs. It does not need the Acepro to hold it.