1 / 6
Empty Spool Dreidel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you're like me, you probably have a few (if not more) empty filament spools lying around.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 641
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
If you're like me, you probably have a few (if not more) empty filament spools lying around.
This "thing" transforms those empty spools into dreidels.
See it in action here.
Print instructions
Category: Toys & Games Print Settings
Printer: Monoprice Maker Select Plus
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 22%
Notes:
This thing is designed for my empty spools all have a 2 inch opening. If your spools differ, your slicer should allow you to re-scale for your opening
Post-Printing
Assembly Instructions
- Print one bottom, one threaded rod and one top
- Twist the rod into the bottom as far as it will go
* Do not over tighten
* I find that I can tighten these by hand, but the hole at the end of the rod should fit a 1/4" or 6 mm Allen key
- Pass the other end of the threaded rod through the opening in your spool holder
- Twist the top onto the rod until the whole assembly turns as a single unit
* Be sure to align the flat sides of the top with the flat sides of the bottom
- Twirl
I have a big fat dreidel.
It's made from PLA.
When my print job cools,
Oh dreidel I shall play.