Liczymy pasujące modele…
Don't believe the hype, three horns can be friends with long necks Cera! This cute and simple Triceratops dinosaur friend makes an excellent desk companion, gift for a child, or friend. They are a companion piece to my previous dinosaur…
A tiny cute triceratops that uses just 5 grams of filament. Great as a cute decoration, keychain, or little desk dino. Print Settings : Layer height: 0.10 mm Infill: 15% Grid Supports: Yes Support type: organic Fuzzy Skin: Outside walls (…
Edit: 23. 2. 2026: I published an updated version here . It's better, so you should definitely download Gertrude instead. Edit: 23. 7. 2026: The updated version is now capable of carrying a dino rider. Try it out! This is my second flexi…
Rails are designed for 6Gx20mm countersunk screws (or 4mm x 20mm)
I love dinosaurs :) This is another flexi-articulated cute little model that I made in a weekend. All overhangs were modeled at 45° to ease the fabrication process without supports. Any doubt or comment about this model please let me know…
This object is part of “Scan The World”. Scan the World is a non-profit initiative introduced by MyMiniFactory, through which we are creating a digital archive of fully 3D printable sculptures, artworks and landmarks from across the globe…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
Simple Triceratops Dinosaur Kit Card More Kit Cards by us @3Z3D: DinoCards: https://makerworld.com/collections/24594404 BugCards: https://makerworld.com/collections/24891663 Triceratops Dinosaur Kit Card Instructional Build Video:
Joined the four bottom parts of the original so that no screws are needed for assembly. Also made two different new tops. The middle ring remains the same as the original. Hope you like it and have fun!
Scan of a triceratops skull. Print instructions print with supports and 0.2 mm layer height using 20% infill.
It took me way too long to finally put a hole in my models, so you don't have to pierce their eyes anymore (I'm looking at you, Ludmilla!) I mean… So go ahead and make your keys heavier! The heavier the key ring, the more important the…
This system prevents the TS55 saw leaving the guide rail FS when cutting with the sloped blade. Even with a 45 degree angle the saw remains secure on the rail thanks to the 2 stops screwed on the sole of the saw Inspired and adapted from…
I used the new new Prusaslices Multimaterial Painting Tool on and colored https://www.thingiverse.com/thing:250645
An anatomically accurate model of the skull of Trick, probably the largest triceratops found in the world and one of the unique exhibits of the Dinosauria Museum Prague. 3D scanned using photogrammetry by Prusa Research. Czech description…
🦖 Cute Triceratops Mini – Tiny Dino Figure 📝 Description 🔒 This model is protected by copyright If you want to sell physical prints, check the subscription here: 👉 https://www.patreon.com/cw/Nieuchronny 🦖 Adorable mini Triceratops from my…
What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…
Love my designs & wanna support what I do? Join my cozy little fam on Patreon 👉 patreon.com/draftaxis 💞 Your support there keeps me motivated and helps me create even more adorable models for everyone! 🌸💪 — Here's my newest knitted-style…
This triceratops fidget toy can be printed in any colours with easy colour customisation. Please note this is a standard fidget toy and not the keyring version.
Great for birthdays, Christmas, and more! happy printing!
Simple flex plate stops using either M3 or M5 screws, reversible design has holes for both options. I ended up using socket head cap screws, these don't take up and build volume and work well. If you use button head cap screws you do lose…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Creality K1 & K1 Max Universal Build Plate Alignment Stops This will allow you to use just about any build plate you like with your K1, K1 Max along with other Creality printers that use this same setup. Here is a video explaining how it…
Thumbstick Tops for Odin 2. Top is the same size as Joycon tops. All parts are meant to be friction fit, use glue at your own risk. 4 Thumbstick styles 1 Height Adjuster for use with stock top Printed on A1 Mini. The smaller the layer…
A new keychain comes from the JURASSIC ERA! ENJOY! FOR COMMERCIAL USE STL file Articulated Triceratops - Commercial Use (3MF)・3D print model to download・Cults (cults3d.com) -- PRINTING PROBLEMS -- I know how frustrating it can be to have…
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 19.9mm set…
Flexi Dino Triceratops Dimension de l'objet 154x72 mm Ep 12 mm
There are 2 more topspins 1)Patternspiner 2)Proppellespiner first pack lay there: https://www.prusaprinters.org/prints/28045-various-spin-tops Print instructions Every spin top can be printed without support if you have enough cooling. 3…
Meet Tricky, the friendliest Triceratops in the 3D-printed dino kingdom! With chubby legs, stubby horns, and a lovable grin, he’s ready to stomp his way into your heart. Designed for clean, fast prints, Tricky is the perfect mix of…
My newest model is this adorable dragon inspired by a baby Triceratops. THIS PROJECT (LIKE ALL CYBZOO3D PROJECTS) IS PROTECTED BY COPYRIGHT. WHICH MEANS, AFTER PURCHASE, YOU DO NOT HAVE THE RIGHT TO SELL COMMERCIALLY. IF YOU WANT TO SELL…
Good morning, Welcome to my profile, full of models and miniatures :-) I have a couple of Dinosaurus triceratops for you. It's a really nice model and suitable for coloring. It stands nicely and creates a beautiful diorama with dinosaurs.…
Keep your countertop clean, dry, and organized with this practical 3D printable glass drip tray. Designed for everyday use next to your coffee machine, sink, or kitchen counter. The removable perforated insert allows water to drain away…
If you have a lot of hair you might want to scale this on the x and y. To use this first make a ponytail. Then stick the tool through the ponytail between the ponytail holder and your head with the point in the direction you want the ends…
I designed these t-track stops to use with my Sienci CNC and t-track table. Print instructions I printed the front and back with jaw side down while the side clamps were printed on their sides.
She's as good as three unicorns! She might even poop three rainbows. Print her and find out! Gertrude is the 2025 update of my second Flexidino, Theobald , from 2023. I've completely rebuilt the model, especially the outdated joints. I've…
Stop your bottles from rolling around in your fridge or shelf and be able to stack bottles on top :-) 4 versions available with a diferent radius: 1,5 litre soda bottle normal wine bottle soda can regular beer bottle All versions…
This very fast print can be mounted over any selfie camera (mainly designed for Tesla interior cameras). If you use it for laptops, ensure that it does not damage your display (as the Slider is not flush with the housing. Be sure to print…
This is a vertical laptop stand designed to hold 6 laptops and help manage their charging cables. It was designed based on the dimensions of an HP ProBook 450 G10 (15.6") and the charging cord that comes with it. The stand in the photos…
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 20.0mm set…
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 19.0mm set…
NOTE: The images are of the BAMBU STUDIO models. As I do not own any Prusa printer, or know how to use Prusa Slicer properly, I cannot guarantee your prints will look the same as mine if you use the converted Prusa .3mf files. The duo of…
Sometimes simple is better. This is my attempt to make better Z-Axis Tops for the MK3/MK3S(+) printers on the stock frame. This is remixed/based off of Prusa's own latest R2 design of the Z-Axis Tops. Here's what's different: Fully opened…
Einfacher Laptophalter, die Stangen Sind in verschieden Toleranzen verfügbar Simple laptop holder, the bars are available in different tolerances
Mount to the sides of the bed rails behind the bed with M3 x 8 SHCS. Use M3 x 25 or 30 SHCS for the stops. All my models are free — if you want to support the filament habit, send me a small tip here .
Endstops for CNC 3018 Pro Router. Visit my blog for more info: https://samueldperry.com/2020/09/01/cnc-3018-pro-router-adding-endstops/
A Triceratops skull model that can serve as a nice desk decoration because who doesn't love dinosaurs? This is a remix from the Triceratops Head model and also uses a free model of a rock. Print does not require supports. Enjoy! If you…
Introducing the"Tiny Triceratops Model," a delightful 3D creation that captures the essence of charm and resilience in a compact form. This meticulously crafted miniature triceratops embodies the iconic features of its larger…
My first attempt at a kit card. I needed it in a hurry for a gift. I may tweak it again soon. If you have requests let me know! The perimeter is 1mm, the pieces are ~0.946mm. With my PLA print at 0.20mm and “Precise Z height” selected,…
🎨You can find the multicolor version of this model on my Thangs page. https://than.gs/m/1331258 💰 You can obtain the commercial license for this model by joining my Thangs Membership or Patreon at the Merchant Tier or above. 🔔The keychain…
Laptop cooler that reduces laptop fan noise and decreases temperatures. To the print itself: Material: Any PLA (I used Extrudr PLA NX2) Temperature: 205 °C (Prusa Slicer preset for said filament) Layer height: 0.3 mm The print worked for…
This is our model of a 3D-printed cooling pad for a laptop. It reduces the temperature of your device and can also boost performance. This design is inspired by the one from Mycero , but it is designed from scratch and it is pretty easy…
A carved figurine of a dinosaur. Tree supports come off easily. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Original Model: https://makerworld.com/en/models/538757#profileId-455917 Modification: Extended the base and made a hook style to make sure the rear is supported and the front doesn't allow for the laptop to slide off…
Jig is designed to work with 30mm deep join for 750mm depth of worktop. You can simply do the math for narrowed pieces. Depth of the join is 35mm maximum, for smaller inset depth just offset the jig “to the left” on the pictures Print…
📝 Description 🔒 This model is protected by copyright If you want to sell physical prints, check the subscription here: 👉 https://www.patreon.com/cw/Nieuchronny Adorable triceratops keychain 🦖✨ Part of my mini cute series – small, playful,…
A remix from @M's blank keystone, https://www.printables.com/model/239913-blank-keystone to which i added end-stops shoulders, and a few chamfers here and there. Previous design did not sit flush with my keystone panel as nothing…
This is a simple folding stand/riser for books, laptops, tablets, and keyboards...etc. Great for travel or just on the go. Measures ~243mm in length X ~64mm tall. It tilts the item in use at 16.3° angle. This is is a print-in-place model…
A detailed, multi-part articulated Triceratops with smooth, reliable flexi movement. Designed with clean shapes and easy-to-assemble joints for a sturdy and fun dinosaur model. Perfect for collectors, kids, dinosaur lovers, and anyone who…
Meet Spike the sad Triceratops. He's sad because no one wants to play with him. Download him and make him happy so he's not sad anymore. He'll bring prehistoric magic to your modern world. You can play with him, he can be your best friend…
I modify the version also found owhich does not fit to my festool TS55 REBQ bought in 2019. The left side was correct , but the right side the 6mm hole was incorrect ( 1mm shift). I also improve a border, to be more easily removable, when…
ORIGINAL : The combination of a pull copter and a spinning top. It launches into the air and keeps spinning on the ground. To launch, hold the launcher with the ripcord in the side with an arrow. BATTLE : Also launches into the air and…
There are 2 more topspins 1)classic-v2-spiner 2)alien style first pack lay there: https://www.prusaprinters.org/prints/28045-various-spin-tops second pack here: https://www.prusaprinters.org/prints/28195-various-spin-tops-vol2 Print…
This is the original Prusa Triceratops head scaled above 500% and cut into pieces for the Core One. you need supports to print and glue
This is a more straightforward sibling to my 180° Stealth Concealed Hinge I designed this version to be easier to print, easier to install, and very practical for things like folding table leaves , fold-out work surfaces , portable desks…
Stops (round and straight) to use in a Festool MFT table
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 18.9mm set…
These guide rail stops can be used with Makita and compatible rails that have an anti-tip lip. There's a front and rear version. They are modifications of the original Festool guide stops from jcjames_13009, which are a good design but…
Famous dinosaur from North America.
A collection of depth stops for drill bits. An OpenSCAD file is included so you can customize them for a better fit or create additional sizes. bit_size is the diameter of the drill bit in mm. This also automatically adjusts the labels on…
This is part of my Open Sauce project! We'll be fighting tops at the stlDenise3D table. Want to win a FREE CORE ONE+?? Then enter the online Printables version of this contest! WHHOOOOOO! ( See contest page ) Note: Online Printables…
Warning: This piece is not stock. It has special dimensions, it needs an adjustment of the selector stop positions, in the MMU2S firmware. Is this moment I use: "MMU2S-TZB 3.0.3" firmware by TheZeroBeast Link:…
Easy to make a cute Triceratop keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Scientifically accurate model of a triceratops. The model features detailed scale/skin texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer height or with a resin…
I found and love the flexi dinosaur, then i found a triceratops but it didn't come in keychain form. So i put together this remix mostly to satisfy myself.
I created the stand for better airflow under the Laptop. Easy to print Material - PETG Perimeter - 3 Filling - Gyroid 15% Supports - NO
Vertical dual laptops and or tablet stand Designed 2021-01-22 thing:4732933 printables TOC Vertical dual laptops and or tablet stand TOC Summary Description Print Settings Buy me a coffee? Summary Minimalist vertical dual laptops and or…
This was remixed from Andyfuentes's Flexi Triceratops I split the file for two color printing. Post your prints of this, I would love to see them. Feel free to ask any questions about printing or to make requests. I have more designs so…
This is a simple little Opening Tool e.g. to: remove phonedisplays open laptops/notebooks/tablets,… open/remove car parts remove E-cigarette-tank-glasses/atomizers or other areas of application…
Print at least 2 monsters, 2 launchers, & 2 zip pulls to battle monster vs. monster in this spinning top game. All parts are designed to print without supports although you may use a brim if you have any adhesion issues without affecting…
I wanted to find dinosaur heads to make handles for my son's dresser drawers. The model I remixed was a perfect candidate. There is a 1/8" (3.18 mm) diameter hole, 30 mm deep to work with a lot of spare hardware I had around the house.…
Festool MFT DIY Corner Stops (20mm) Verschiedene Varianten: Corner Stop 121mm x 121mm Corner Stop 217mm x 121mm Corner Stop 130mm x 130mm (einstellbar) mit verschiebbaren “Dogs” Straight Stop 121mm Straight Stop 217mm
Laptophalterung um den Laptop stehend am Schreibtisch zu positionieren. Das Hauptmodell habe ich von FizulNizam | Printables.com Wollte noch etwas Material und Zeit vom Ausdruck sparen und vielleicht noch etwas an 3D gewinnen. Breite…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Installing the original z-top parts will result in some clearance between the z-top and the z-rod (2.4mm to be exact). This could (happened to only one of my printers) cause wobble or vibrations (or rather annoying vibration sounds) as…
Had an old 17" HP dv7 (my first PC) in working condition but with a broken keyboard and dead battery, and three 2.5" HDD from family members' laptops I upgraded to SSDs. Since the parts had been sitting in a drawer for years, I decided to…
These are gridfinity bins that have magnetic tops to make them stackable and more sturdy. Instead of a normal rim, it is a skeleton magnetic frame. short video of them in action These shouldn't need any support to print. The other…
Stendo clamps for G29! I made these after I made myself a desk with a 30mm top that sits on a 40mm square tube frame and realizing I no longer can play my rally sims. The clamps can now clamp 80mm tall objects since I figured that's…
A simple to make 17 piece triceratops skeleton. No glue needed as all pieces securely slot together & all pieces are appropriately named to aid construction. Images shown are printed in prima create PETG (blue @100% scale & pink @…
A simple painting handle plus caps in a handful of different variations. The handles and caps are the same thread as ‘normal’ plastic soda bottles, so you can use plastic screw caps on it (or use the giant caps on a normal bottle, I…
This is 3D puzzle that classic style Triceratops. Since there are only a few parts, 3D printing time is short and assembly is easy. When 3D printing, it is convenient to use packaged STL models with all parts in one package. STL models…
Um die Topfscharniere von Ikea an eigenen Projekten benutzen zu können, habe ich mir diese Schablonen zusammengestellt, um so einfach wie möglich zu markieren wo die Löscher hin müssen. Für meinen Fall (19mm Bretter und 3mm Tür Abstand…
*Added .STEP file for editing, enjoy! Designed this to store away my work laptop when I'm done for the day to clear space so I can slide-out my personal keyboard+mouse. My configuration allows to keep the laptop connected to power, USB…
1)Classic one 2)Transparent-skeleton 3)Pen holder (can ruin your desk, but fun!) 4)Overcomplicated (testing) Cats really love this thing... actually everybody:))) Print instructions Every spin top can be printed without support if you…
Einfach drucken - wenn man nen strukturierte PEI Platte hat - spiegeln
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I have a few thick laptops to organize. I did a single laptop stand design a few days ago and expanded on that. Some overhang on the middle 2 ribs, will probably need supports to prevent sagging. ***** Want to buy me a coffee?…
Couldn't find any build plate stops for the Voron Trident so I designed these, makes aligning the bed super easy. They are designed to work with the LDO kit beds that have the U shaped cutouts in the rear, not sure if any beds from other…
There always has to be an end of the line... Use these to keep your trains on the track! These simple buffer stops fit Dragon Railway track: https://www.printables.com/model/346663-train-tracks-dragon-railway Two styles: with buffer pads…
A cute little Triceratops sitting on your desk 😉 My daughter loves dinosaurs, so i made this little buddy for her, printes in silk dual color PLA. But of course you could add a little realism to it by making some beautiful multicolor…
![[3Dino Puzzle] Classic Style Triceratops](https://media.printables.com/media/prints/469160/images/3845509_88ea6389-5c46-48d8-aa0f-92a76d64b8d0/large_display_trike_classic-pic1_469160.jpg)
