Drill Press Knob (Central Machinery 12-Speed Drill Press)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the factory knob to allow for more clearance
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I built a plate/sled/fence for my drill press. When I went to readjust it, I realized that I couldn't put it far enough back to use the fence properly, because the handle to raise and lower the plate couldn't spin freely.
So I designed this knob to replace the cumbersome handle that comes with the machine. It IS a little slower, but honestly It hasn't been a problem.
I included a small test print so you can ensure your settings print where it will fit snuggly on the shank.
Be sure to print with 4+ perimeters, this will ensure it doesn't strip itself quickly. I recommend PETG or ABS.