Drill Press Knob (Central Machinery 12-Speed Drill Press)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the factory knob to allow for more clearance
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I built a plate/sled/fence for my drill press. When I went to readjust it, I realized that I couldn't put it far enough back to use the fence properly, because the handle to raise and lower the plate couldn't spin freely.
So I designed this knob to replace the cumbersome handle that comes with the machine. It IS a little slower, but honestly It hasn't been a problem.
I included a small test print so you can ensure your settings print where it will fit snuggly on the shank.
Be sure to print with 4+ perimeters, this will ensure it doesn't strip itself quickly. I recommend PETG or ABS.