YAMPT - Yet another motorized photo turntable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on this concept, inspired by Elkromo
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a large platter printed out of marble PLA for taking clean images on, but realized I wanted it motorized. Elkromo had a concept I liked so I modified it to suit my needs. Added some cable mgmt. Made it so you can power it via micro usb.
Printing: Should only need tree supports underneath the bearing pegs. I split those off such that you can print them in different orientations, but I believe the strongest is all as one piece.
Materials used:
3 x 609RS bearings - This link is 10 per package https://a.co/d/3b4UfFv
1 x Micro USB to DIP adapter - This link is 10 per https://a.co/d/bg9761w
1 x High Torque gearbox - https://a.co/d/czx4Tct
1 x Low voltage DC speed controller - This link has 6 https://a.co/d/69pDUQj
Mounting - Bearings and motor are mostly press-fit. The boards screw in with screws, the ones I used are bad so I'll leave that up to you, but the holes are 2.5mm and the openings on the boards are 3mm, so need to be under 3mm.