YAMPT - Yet another motorized photo turntable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take on this concept, inspired by Elkromo
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a large platter printed out of marble PLA for taking clean images on, but realized I wanted it motorized. Elkromo had a concept I liked so I modified it to suit my needs. Added some cable mgmt. Made it so you can power it via micro usb.
Printing: Should only need tree supports underneath the bearing pegs. I split those off such that you can print them in different orientations, but I believe the strongest is all as one piece.
Materials used:
3 x 609RS bearings - This link is 10 per package https://a.co/d/3b4UfFv
1 x Micro USB to DIP adapter - This link is 10 per https://a.co/d/bg9761w
1 x High Torque gearbox - https://a.co/d/czx4Tct
1 x Low voltage DC speed controller - This link has 6 https://a.co/d/69pDUQj
Mounting - Bearings and motor are mostly press-fit. The boards screw in with screws, the ones I used are bad so I'll leave that up to you, but the holes are 2.5mm and the openings on the boards are 3mm, so need to be under 3mm.
