1 / 4
Winnie the pooh honey pot (hunny pot) tassel — zdjęcie 1
1 / 4

Winnie the pooh honey pot (hunny pot) tassel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small addition to add character to a drawer string bag for Winnie the Pooh lovers.

Ocena
0 / 5
Polubienia
14
Pobrania
74
Wydruki
0
Wyświetlenia
300
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

For this model, I used eSun matte almond yellow PLA with a 0.1mm layer height and a small brim for adhesion. I used a small amount of brown acrylic paint on the label and handle. To fill the letters, apply a thin layer of the brown paint to the label ensuring to fill in all gaps then wipe off with a tissue. I used super glue, first applied to the tip of the string to solidify it and make sure the glue doesn't soak too far up the string, then I glued it into the bottom of the pot. A STEP  file has been including so you can add a hole to better suit your string size.

Tagi