Winnie the pooh honey pot (hunny pot) tassel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small addition to add character to a drawer string bag for Winnie the Pooh lovers.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 76
- Makes
- 0
- Views
- 304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
For this model, I used eSun matte almond yellow PLA with a 0.1mm layer height and a small brim for adhesion. I used a small amount of brown acrylic paint on the label and handle. To fill the letters, apply a thin layer of the brown paint to the label ensuring to fill in all gaps then wipe off with a tissue. I used super glue, first applied to the tip of the string to solidify it and make sure the glue doesn't soak too far up the string, then I glued it into the bottom of the pot. A STEP file has been including so you can add a hole to better suit your string size.