Replacement figures / people - Lovevery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
We had a few of these get chewed up by our dogs so i modeled a replacement that can be printed. these are modeled exactly off of an existing figure so all dimensions should be very close to original. i shaved 0.1 or 0.2 mm off the diameter to make sure they would fit in all of the original toys.
I also made a version with some basic arms and fingers should you want a little more detail in your person. both files are below.
if you print with 0.12 layers, you can pause at these layer numbers for the color changes shown.
247 - start of belt
253 - end of belt, start of shirt
483 - end of shirt, start of neck
Printed in PETG, 3 walls 15% infill regular supports touching everywhere. You will get a tiny neck brace of supports (probably not needed, but its very small), and the supports between the legs.