Replacement figures / people - Lovevery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
replace lost or damaged peg people for the lovevery kids toy sets.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
We had a few of these get chewed up by our dogs so i modeled a replacement that can be printed. these are modeled exactly off of an existing figure so all dimensions should be very close to original. i shaved 0.1 or 0.2 mm off the diameter to make sure they would fit in all of the original toys.
I also made a version with some basic arms and fingers should you want a little more detail in your person. both files are below.
if you print with 0.12 layers, you can pause at these layer numbers for the color changes shown.
247 - start of belt
253 - end of belt, start of shirt
483 - end of shirt, start of neck
Printed in PETG, 3 walls 15% infill regular supports touching everywhere. You will get a tiny neck brace of supports (probably not needed, but its very small), and the supports between the legs.