Ikea KALKGRUND wall mounted soap holder ring - 3M Command Strip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
wall side of the KALKGRUND soap holder system - 3M strip
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
The original KALKGRUND has to be screwed onto the wall and it eventually fell off. I remade it as a 3M Command strip backing plate
V3: removed the dowels and replaced it with two wedges that slide in. the previous version broke too easily even with glue
V1/V2:
easiest to print if you slice it on the “riser” with 5mm dowels, so they can all be printed flat
the “top” of the ring has to bezel and should stick to the bed pretty well
print the wall side face-down so the strip-groove isnt floating
V3:
print standing up so the layer lines are perpendicular to the pulling force. the 3mf shows how.
use support: there's really not much of it and they pull off easily
parametric fusion360 file included
printed in PETG