1 / 3
Grommet for Production Privee Shan GT (2017-2020?) Dropper Post Routing Hole — zdjęcie 1
1 / 3

Grommet for Production Privee Shan GT (2017-2020?) Dropper Post Routing Hole

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A grommet preventing mud, dust and water from accumulating in the seat tube of Production Privee's Shan GT. Print in TPU

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I recently did a complete rebuild of my 2017 (?) Shan GT Rothmans and noticed a bunch of dirt and grime accumulated in the seattube around the bottom bracket, which must have creeped in over time through the hole of the internal dropper post routing.

As I couldn't find any rubber plug to reduce the creep, I decided to design and print one myself. It's made out of TPU, so that it easily slips into the frame and locks slightly. With the cable housing in place it is locks safely in in the frame. It also prevents the hose from getting cut by the frame and getting stuck on the edges. 

How to Print

  • Works with TPU (testet w. Overture black TPU)
  • Prints without support. 
  • orient as shown in the rendering
     

Tagi