Grommet for Production Privee Shan GT (2017-2020?) Dropper Post Routing Hole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A grommet preventing mud, dust and water from accumulating in the seat tube of Production Privee's Shan GT. Print in TPU
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I recently did a complete rebuild of my 2017 (?) Shan GT Rothmans and noticed a bunch of dirt and grime accumulated in the seattube around the bottom bracket, which must have creeped in over time through the hole of the internal dropper post routing.
As I couldn't find any rubber plug to reduce the creep, I decided to design and print one myself. It's made out of TPU, so that it easily slips into the frame and locks slightly. With the cable housing in place it is locks safely in in the frame. It also prevents the hose from getting cut by the frame and getting stuck on the edges.
How to Print
- Works with TPU (testet w. Overture black TPU)
- Prints without support.
- orient as shown in the rendering