1 / 3
Door gap killer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Some owners of the PrusaBox by PrinterBox complains about a little gap between the doors and the frame, because the doors get slightly bend when closed. I solved this with these tiny gap killers.
You just need neodym magnets of 8 x 4 mm in size. If you have 8x3 mm magnets, just don't push them all the way in. But even if you do, there is still enough magnetic force left to close the gaps.
Print as many as you need, push the magnets in and use some superglue to attach the gap killer to the door(s).
May work with other enclosures as well.