1 / 4
80mm Fan Adapter for Arctic Cooling Copper Silent 3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that clips onto the heatsink like the original fan
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Just a simple adapter that allows you to mount a normal 80mm fan to the heatsink of an Arctic Copper Silent 3.
To mount the fan to the adapter, just use normal fan screws. If the clip isn't tight enough, just back out the fan screws a bit so that they press against the heatsink.
I left some slack below the hooks that grab onto the heatsink, that way they can be printed without supports and sagging material (I used PETG) can just be cut off with a knife