1 / 3
HD Middle Skid Plate for Arrma 6s Kraton / Typhon / Outcast  / Fireteam / etc — zdjęcie 1
1 / 3

HD Middle Skid Plate for Arrma 6s Kraton / Typhon / Outcast / Fireteam / etc

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extra durable skid plate and countersink adapters for all Arrma 6s vehicles.

Ocena
0 / 5
Polubienia
16
Pobrania
117
Wydruki
0
Wyświetlenia
559
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

I had printed some other center skid plates for my Typhon 6s but none of them were as durable as I would have liked, especially as I wanted an ultra strong one for my Fireteam as well.

Thus, I made this one which uses 4 M4x12 BCS screws and 4 countersink adapters which go into the slots in the chassis to prevent cracking.

Height - 5mm 

Fits - All Arrma 6s vehicles with a metal chassis

 

Durability 

I design all the parts I post to be as durable as possible for a 3D printed part. These are no exception. I've tried to make this skid plate the proper shape to slide over rocks, sticks, logs, ledges, etc without catching or cracking the skid plate. The addition of the countersink fillers reduces the risk of breaking due to overtorquing.

In addition, real world testing has proved this as well. I personally use this design as my main skid plate on my Typhon 6s, my Fireteam 6s, and a Mojave 6s. I've had the skid plate on the Fireteam since I bought it 4 months ago and I still haven't needed to replace the skidplate.

Print Settings

Printer Brand:

ELEGOO

Printer: 

ELEGOO NEPTUNE 4 Pro

Supports: 

No

Resolution:

0.16

Infill: 

100

Filament: Elegoo PLA Pro Black

Installation

First, remove the four M4 countersunk screws from around the center differential gear slot. Don't jostle the car too much once the screws are removed as it could cause the internal assembly to come loose, which would take some fiddling to get back in place. Next grab the 4 countersunk adapters and put one into each hole in the chassis. Next, you can attach the skidplate using 4 M4x12 BCS screws. Depending on the fit, you may be more comfortable putting the four screws into the skidplate first, and just sliding on the countersink adapters; then attaching it to the car. YMMV.

Tagi