Small 12mm chain riser with PTFE tube guide for Creality K1/K1C (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This riser elevates the chain by 12mm from its original position. And you can remove front lid. And have Tube guide!!!
- Ocena
- 4,667 / 5
- Polubienia
- 41
- Pobrania
- 448
- Wydruki
- 4
- Wyświetlenia
- 2015
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Small 12mm chain riser with PTFE tube guide for Creality K1/K1C (Remix)
This riser elevates the chain by 12mm from its original position without altering the original bolt placement. And you can remove front fan casing. And have Tube guide!
Simple, ugly, but quite a working remix. I cut the original model in the slicer along the edges by 3.55 mm.
I printed PETG 0.2 layers with Grid support (Top Z distance 0.1 mm, a lot of manual work later to tear off the support, but overall a good result). I know the original design is not very rigid, but it works just fine.
The holes match the original models, the upper part without the guide can be used together - the lid can also be removed.
Assembly instructions 1:1 with the original model, M3x5x4.2 inserts work great.
Solves 2 problems:
1. You can remove the front fan casing without disassembling the riser.
2. There is a guide for the tube (it is a little inconvenient to quickly disconnect the tube, but it works well).