Diamond edge SB-1 wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wall mount for the compound bow Diamond edge SB-1, needs a slight twist to unhook.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I made a simple wall mount for the Diamond edge SB-1, mostly because i wanted something thats a bit harder to accidentally unhook.
IMPORTANT: If your are mounting this close to another wall, it is made so that you have to "rotate" it clockwise like picture 2 to be able to remove it, you will need approximately 15-16cm of space behind the lower cam to be able to do so.
One model is with 2 short screws (countersunk or flat), holes for the screw head are 9mm.
One model is with 1 longer screw and 1 shorter (countersunk or flat), holes for the screw head are 9,5mm(long) and 9mm(short).
See picture 3 if that helps.
See picture 4 for print orientation without need for supports.
I printed it with petg and 6-7 walls or something like that, not sure if thats needed but have worked fine for about 2 years.
Not very active here but feel free to reach out if you need anything changed.