Diamond edge SB-1 wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple wall mount for the compound bow Diamond edge SB-1, needs a slight twist to unhook.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I made a simple wall mount for the Diamond edge SB-1, mostly because i wanted something thats a bit harder to accidentally unhook.
IMPORTANT: If your are mounting this close to another wall, it is made so that you have to "rotate" it clockwise like picture 2 to be able to remove it, you will need approximately 15-16cm of space behind the lower cam to be able to do so.
One model is with 2 short screws (countersunk or flat), holes for the screw head are 9mm.
One model is with 1 longer screw and 1 shorter (countersunk or flat), holes for the screw head are 9,5mm(long) and 9mm(short).
See picture 3 if that helps.
See picture 4 for print orientation without need for supports.
I printed it with petg and 6-7 walls or something like that, not sure if thats needed but have worked fine for about 2 years.
Not very active here but feel free to reach out if you need anything changed.