1 / 2
Fiberstream Toolhead — zdjęcie 1
1 / 2

Fiberstream Toolhead

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Never really liked "Fibersteam" so here's the Fiberstream toolhead.

Ocena
0 / 5
Polubienia
23
Pobrania
122
Wydruki
0
Wyświetlenia
2766
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an ongoing project for me and I might have updates for printed parts in the future. As is, I've tested just about everything and have it working on my own trident. 

I'd like to note that you won't gain much from the sheetmetal x carriage on a printed gantry. As long as the rest of your setup is solid, it likely isn't worth using. I've seen no noticeable increase in max recommended accel and no improvements to my input shaper graphs on the printed monolith gantry (z2 preload x rail, gt3 9mm belts, monolith awd). 

Shoutout to dr.rafi For a great toolhead design!

Tagi